Handling The Product; Safety Components - Bang & Olufsen BeoVision 5 - 42 US Manual

1.4 Handling the product, English

Handling the product

Warning
STATIC ELECTRICITY
MAY DESTROY THE
PRODUCT
Use of ESD-mat
ESD
Handling
Lithium battery

Safety components

Static electricity may destroy the product.
A static-protective fi eld service kit, including ESD-mat, must always be used when
the product is disassembled and there is direct access to eg. modules or internal
wiring.
Follow the instructions in the guide.
The ESD-mat must never be connected to the product when mains is applied.
The Plasma Display Panel must always be placed vertical to avoid damaging it self.
Whenever possible place the PDP in the servicestand.
Use only the micro fi bre cloth, part no. 3375706 to clean the Plasma Display Panel.
Do not use any kind of cleaning detergents on the Plasma Display Panel.
Warning:
Short-circuit and/or overcharging some types of lithium batteries may result in a
violent explosion.
When replacing components with this symbol, the same type must be used (same
values for eg. ohm and watt).
The component must be mounted in the same way as the one it replaces.