X-RIDE125/290
X-RIDE125/290
PROCESOS DE MANTENIMIENTO
Checking and topping up the rear brake fl uid
The rear brake fluid reservoir is located behind the kick start lever.
WARNING
In order to perform a thorough inspection, place the motorcycle in a
horizontal position.
To top up the fl uid:
- Remove the two screws (1) from the reservoir cover.
- Remove the internal rubber and the pressure ring.
- Top up the fluid.
Type of brake fl uid: DOT4.
WARNING
The brake fl uid level should fully cover the sight gage (2).
1
Rear brake fl uid reservoir cover
Rear brake fl uid reservoir
owner's manual
44
X-RIDE 125/290
2