Maintenance Process; Checking And Topping Up The Front Brake Fl Uid - SHERCO X-RIDE 125 Manual Del Propietário

X-RIDE125/290 X-RIDE125/290
MAINTENANCE PROCESSES
Checking and topping up the front brake fl uid
The front brake reservoir is located next to the brake lever. It is fitted with
an inspection window for checking the fluid level.
WARNING
In order to perform a thorough inspection, place the motorcycle in a
horizontal position.
To top up the fl uid:
- Remove the two screws (1) from the reservoir cover.
- Remove the internal rubber.
- Top up the fluid.
Type of brake fl uid: DOT4.
WARNING
The brake fl uid level must be between 3 and 4 mm from the top edge.
1
Front brake fl uid reservoir cover
Front brake fl uid reservoir
owner's manual
X-RIDE 125/290
42