Acquisition Function (Datalogger) - Promax US TV EXPLORER II Manual De Uso

Also can delete any channel list, or remove and add channels from another
standard list by means of the editing options offered by the
10
FREQ:
CH:
MPEG-2
Keep the
available in the instrument and later select the current channel plan by means of the
rotary selector [1].
The
EXPLORER
channel plan by means of the horizontal
the channel-tuning field
operation modes is possible to check cyclically the entire active channel list.
NOTE:
The icon
equipment is carrying out an internal operation and user must wait to
complete it.

5.10 Acquisition function (DATALOGGER)

The Datalogger function allows the user to carry out and store measurements in
a fully automatic way. It can store for each acquisition the measurements made in
different points of the installation. The measurements made are relevant to the current
analogue or digital channel, in the active channel plan.
Page 34
CHANNEL SET
FCC
EIA
HRC
30 50
IRC
57.00 MHz
EXIT
-3 kHz
A02
Figure 11.- Channel plans listing.
[24] key pressed in order to access to the listing of channel plans
allows directly changing the tuned channel pertaining to the active
[24] and in the TV
in the upper corner of the screen indicates that the
USER'S MANUAL. US TV EXPLORER
70 90 110
C/N: >21.3
» POWER: 55.8
MER: 19.5
SER: 1.0E-5
VBER: 1.0E-8
cursors [6]. From this way, once selected
[10] and MEASUREMENTS
UTILITIES [22] menu.
130
dB
dBµV
dB
11/2013
II
[12]