Re-attaching the front panel
1
Slide the front panel to the left.
The front panel and the head unit are connected on the left side. Make sure that the
front panel has been properly connected to the head unit.
2
Press the right side of the front panel until it is firmly seated.
If you can't attach the front panel to the head unit successfully, try again. Forcing the
front panel into place may result in damage.
6
En
Parts and controls
Main unit
LCD screen
or
Press to return to the previous track (chapter) or go to the next track (chapter).
Press and hold to perform fast reverse or fast forwards.
Press to answer or end a call.
Volume/SRC/
Press to cycle through all the available sources.
OFF
Press and hold to turn the source off.
Press to activate the voice recognition mode such as Siri when the iPhone is
connected to the unit via Bluetooth or USB.
Press to switch between the Application screen and the AV operation screen.
Press and hold to switch to the camera view mode.
NOTE
To activate the camera view mode with this button, set [Back Camera Input] to
[On] (page 41).
Press to display the top menu screen.
Press and hold to power off. To power back on, press any button.