Device Info (Info) - Cameo OPUS SP5 FC Manual De Usuario

USB Update—Firmware update via USB interface. OFF = Block firmware update via USB interface. ON = Allow firmware update via USB
interface.
Factory Reset—Reset to factory settings.

DEVICE INFO (Info)

Starting from the main display, press ENTER to go to the main menu. Use the UP and DOWN control keys to select the Infomenu and press ENTER.
This will take you to the submenu to view the device information (select via UP and DOWN, confirm with ENTER).
System Info
Error Info Functional error display
If it is not possible to eliminate a functional error by resetting or restarting, the faulty unit must be
repaired by an authorized service center.
Temperature Temperature display
Runtime Displays operating time
Firmware Displays the firmware of
components 1U to 8U
Head
Base
Unit
Total Time
Current Time
Time PW
Clean Current
Vx.x.x
xx°C/F°
xx°C/F°
Displays the temperature in Celsius or Fahrenheit
Displays the total operating time in hours
Displays the current operating time
Inputs the password to reset the current
operating time
(Time PW = 050)
Resets the current operating time
13