Symbols - Ryobi P541 Manual Del Operador

Some of the following symbols may be used on this product. Please study them and learn their
meaning. Proper interpretation of these symbols will allow you to operate the product better and
safer.
SYMBOL
Safety Alert
V Volts
Direct Current
Wet Conditions Alert
Read The Operator's
Manual
Wear Eye, Hearing, and
Head Protection
SAFE-T-TIP
Guard
Operate With Two
Hands
One Handed
Kickback
Bar Nose Contact
Wear Gloves
Wear Safety Footwear
Keep Bystanders
Away
Recycle Symbols
Li - Ion

SYMBOLS

NAME
Indicates a potential personal injury hazard.
Voltage
Type or a characteristic of current
Do not expose to rain or use in damp locations.
To reduce the risk of injury, user must read and
understand operator's manual before using this
product.
Wear eye protection which is marked to comply with
ANSI Z87.1 as well as hearing and head protection
when operating this equipment.
The SAFE-T-TIP
Nose
®
prevent kickback.
Hold and operate the saw properly with both hands.
Do not operate the saw using only one hand.
DANGER! Beware of kickback.
Avoid bar nose contact.
Wear non-slip, heavy-duty protective gloves when
handling the chain saw.
Wear non-slip safety footwear when using this
equipment.
Keep all bystanders and animals at least 50 ft. away.
This product uses lithium-ion or nickel-cadmium
batteries. Local, state or federal laws may prohibit
disposal of batteries in ordinary trash. Consult your
local waste authority for information regarding available
recycling and/or disposal options.
7 - English
DESIGNATION/EXPLANATION
nose guard on the guide bar helps
®