KTM CRASH BAR KIT Instrucciones De Montaje página 23

Right-hand side
–
Remove both cables from cable guide
–
Turn cable guide
500586-01
–
Mount and tighten cable guide adapter
–
Mount and tighten cable guide
–
Position both cables in cable guide
500587-01
–
Position right crash bar
–
Mount screw
–
Position plastic clamp
–
Mount clamp
500588-01
–
Position wide spacer washer
behind the crash bar.
–
Mount screw
tighten yet.
–
Position narrow spacing washers
left and below behind the crash bar.
–
Mount and tighten screws
ded).
500589-01
Guideline
Screw, crash
bar
–
Tighten screw
Guideline
Screw, crash
bar
br
.
br
clockwise and remove.
5
br
.
br
.
1
.
6 7
with washer , but do not tighten yet.
4
on the frame.
3 8
with screws , but do not tighten yet.
bl
(included) on the right
bo bm
with washer (all included), but do not
bk
(included) at the top
bn
with washers
M8x30 25 Nm (18.4 lbf ft)
bo
.
M8x35 25 Nm (18.4 lbf ft)
MOUNTING 5
(included).
bm
(all inclu-
Loctite ® 243™
Loctite ® 243™
9