General Description; Temperature Control - WAGNER HT4500 El Manual Del Propietario

General Description

This heat gun is a quality power tool. Like any power tool, it can be dangerous when misused.
Read the following instructions carefully and follow all safety precautions. It is the responsibility
of the owner to use the heat gun properly.
Specifications
Housing: ..............................................Engineered high-impact corrosion and heat-resistant polymers
Wattage: ......................................................................1500 watts on highest setting, 150 watts on lowest
Heat Output: .................. Approximately 1200°F on highest setting, approximately 120°F on lowest
BTU: ........................................................................................... Approximately 5100 BTUs on highest setting
Weight: ...................................................................................................................................................... 1.5 pounds
Uses
• Soften paint, caulking and putty for easier removal
• Soften adhesives to help remove floor tiles
• Bend plastic pipes
• Shrink tubing for electrical work
• Shrink plastic film for wrapping or weatherproofing
• Loosen rusted nuts, bolts and fittings

Temperature Control

The temperature control gives you a wide temperature range to choose from, depending upon
the type of project. The temperature can be adjusted in 20ºF increments from 120ºF to 1200ºF.
1
2
English
2
b
# Item
1
Switch
2 Display
3 Temperature
adjustment
4 Air flow
adjustment
a
4
3
Description
Switches the heat gun OFF (0),
to Cool Down Mode (1) or Usage
setting (2).
Shows the current heat output (a)
and air flow (b) of the heat tool.
Increases or decreases the
temperature output of the heat tool.
Increases or decreases the air flow
output of the heat tool.