Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
FEATURES AND CONTROLS
B
C
A
Drop-in Control Panel
A
B
C
D
E
REAR POWER
Countertop Range Control Panel 59522, 6954702, 6954703,
6954704
B
A
H
G
Countertop Control Range 69520 and 69523 (left side)
A On/Off button. Press to turn on the range.
B Power Mode LED Light. Illuminates when the range is on.
C Display Panel. Displays the power level, set temperature, or time
depending upon the selected mode.
D Down button. Decreases the power level or time.
E Up button. Increases the power level or time.
F Timer button. Used to switch on and start the timer function.
G Temperature LED Light. Illuminates when the unit is in
temperature mode.
H Power/Temp button. Switches between power and temperature
°
°
and
F and
C.
Professional Series Countertop and Drop-In Induction Ranges Operator's Manual
D
E
A
B
C
D E
FRONT POWER
2 X 3500 WATT @ 240V
2 X 3000 WATT @ 208V
C
D
E
OPERATION
WARNING
Electrical Shock Hazard
Keep water and other liquids from entering the inside of the
equipment. Liquid inside the equipment could cause an
electrical shock.
CAUTION
Burn Hazard
Do not touch hot food, liquid or heating surfaces while
equipment is heating or operating.
NOTICE: Do not preheat empty cookware. Because of the speed and
efficiency of the induction range, cookware can very
quickly overheat and be damaged.
NOTICE: Do not drop cooking utensils or other objects onto the
cooking surface. The strong, non-porous surface will
break. The warranty does not cover this type of abuse.
NOTICE: Do not leave an empty pan on an operating unit.
NOTICE: Do not heat sealed cans or containers, they may explode.
Turn on the Induction Range
Press and release
Adjust the Power Level or Temperature
F
Increase or decrease
Press
to increase the power level or temperature.
Press
to decrease the power level or temperature.
Switch between power and temperature modes
Press and release
Switch the temperature control between
Press and release
Activate the Timer (69520 and 69523 only)
1. Press and release
The display will show "1" with a flashing dot in the right-hand
corner.
2. Press
or
3. When the timer cycle is complete, the unit will turn off.
4. To cancel the timer, press
Cook Food
The display should remain constant during operation. If the display is
flashing, see the Troubleshooting section in this manual.
Removing cookware from the cooking surface for more than10 minutes
will cause the unit to automatically turn off. Removing cookware for
less than 10 minutes will not interrupt operation.
.
.
°
°
F and
C
.
.
to set the timer from 1 to 180 minutes.
or
.
3
Publicidad
Tabla de contenido
