Introduction; Safety Informations - Minipa MFA-840 Manual De Instrucciones

1) INTRODUCTION

• One Unit with Two Functions: This instrument was
designed to check the phase sequence, and at the
same time it has LEDs to show you if the phase is
open or not.
• Alligator Clips: They can easily involve the terminals of
the control panel to be tested, guaranteeing reliability
and safety.
• Highly Reliable: It can check a large range of 200V to
480V AC three-phase. The instrument guarantee high
reliance and performance.
• Functional Design: Small, light and portable. It was
designed to facilitate the operation to the maximum.
2) SAFETY INFORMATION
This instrument was designed, manufactured and tested
according IEC-348 (Safety requirements for electronic
measuring apparatus)safety class III.
This instruction manual contains warnings and safety
rules that must be observed by the user to ensure safe
operation of the instrument and retain it in safe condition.
Therefore, read these operating instructions thoroughly
and completely before using the instrument.
The symbol
must refer to the relevant section of this instruction manual
safe operation of the instrument.
on the instrument means that the user
12