Publicidad
Idiomas disponibles
Idiomas disponibles
15. When using the cleaner as a blower
• always use protective goggles, a cap and mask
while operating;
• always be sure that the cleaner is switched off
and the battery cartridge is removed before
clearing a blockage;
• always be sure of your footing on slopes;
• walk, never run;
• never point the nozzle at anyone in the vicinity;
• Keep all nuts, bolts and screws tight to be sure
the cleaner is in safe working condition;
• Store the cleaner only in a dry place;
• The operator or user is responsible for acci-
dents or hazards occurring to other people or
their property.
KEEP FOR FUTURE REFERENCE
WARNING:
DO NOT let comfort or familiarity with product
(gained from repeated use) replace strict adherence
to safety rules for the subject product. MISUSE or
failure to follow the safety rules stated in this instruc-
tion manual may cause serious personal injury.
This cleaner is intended for both domestic and commer-
cial use, for example in hotels, schools, hospitals, facto-
ries, shops, offices and rental businesses.
IMPORTANT SAFETY INSTRUCTIONS
FOR BATTERY CARTRIDGE
1.
Before using battery cartridge, read all instruc-
tions and cautionary markings on (1) battery
charger, (2) battery, and (3) product using bat-
tery.
2.
Do not disassemble battery cartridge.
3.
If operating time has become excessively
shorter, stop operating immediately. It may
result in a risk of overheating, possible burns
and even an explosion.
4.
If electrolyte gets into your eyes, rinse them out
with clear water and seek medical attention right
away. It may result in loss of your eyesight.
5.
Do not short the battery cartridge:
(1) Do not touch the terminals with any conduc-
tive material.
(2) Avoid storing battery cartridge in a container
with other metal objects such as nails, coins,
etc.
(3) Do not expose battery cartridge to water or
rain.
A battery short can cause a large current flow,
overheating, possible burns and even a break-
down.
6.
Do not store the tool and battery cartridge in
locations where the temperature may reach or
exceed 50°C (122°F).
7.
Do not incinerate the battery cartridge even if it
is severely damaged or is completely worn out.
The battery cartridge can explode in a fire.
8.
Be careful not to drop or strike battery.
9.
Do not use a damaged battery.
SAVE THESE INSTRUCTIONS.
6
Tips for maintaining maximum battery life
1.
Charge the battery cartridge before completely
discharged.
Always stop tool operation and charge the bat-
tery cartridge when you notice less tool power.
2.
Never recharge a fully charged battery cartridge.
Overcharging shortens the battery service life.
3.
Charge the battery cartridge with room tempera-
ture at 10°C – 40°C (50°F – 104°F). Let a hot bat-
tery cartridge cool down before charging it.
4.
Charge the battery cartridge once in every six
months if you do not use it for a long period of
time.
FUNCTIONAL DESCRIPTION
CAUTION:
• Always be sure that the cleaner is switched off and the
battery cartridge is removed before adjusting or check-
ing function on the cleaner.
Installing or removing battery cartridge (Fig. 1)
CAUTION:
• Always switch off the cleaner before installing or remov-
ing of the battery cartridge.
• Hold the cleaner and the battery cartridge firmly
when installing or removing battery cartridge. Fail-
ure to hold the cleaner and the battery cartridge firmly
ENC007-7
may cause them to slip off your hands and result in
damage to the cleaner and battery cartridge and a per-
sonal injury.
To remove the battery cartridge, slide it from the cleaner
while sliding the button on the front of the cartridge.
To install the battery cartridge, align the tongue on the
battery cartridge with the groove in the housing and slip it
into place. Insert it all the way until it locks in place with a
little click. If you can see the red indicator on the upper
side of the button, it is not locked completely.
CAUTION:
• Always install the battery cartridge fully until the red
indicator cannot be seen. If not, it may accidentally fall
out of the cleaner, causing injury to you or someone
around you.
• Do not install the battery cartridge forcibly. If the car-
tridge does not slide in easily, it is not being inserted
correctly.
Battery protection system
The cleaner is equipped with the protection system,
which automatically cuts off the output power for its long
service life.
The cleaner stops during operation when the cleaner
and/or battery are placed under the following situation.
This is caused by the activation of protection system and
does not show the cleaner trouble.
• When the cleaner is overloaded:
At this time, press the "OFF" button and remove
causes of overload and then press the "HIGH/LOW"
button again to restart.
• When battery cells get hot: (refer to the note below.)
If any operation of the "HIGH/LOW" button and the
"OFF" button, the motor will remain stopped. At this
time, stop use of the cleaner and cool or charge the
battery cartridge after removing it from the cleaner.
Publicidad
