baltur BTL 14 Instrucciones página 22

PRINCIPLE DIAGRAM DISK-ELECTRODES SETTING
After having installed the nozzle, check the correct position of the electrodes and disk according
to the following levels. It's adviseable to check levels after every intervention on head.
N.B. To prevent damage to the support effect nozzle assembly/disassembly tasks with the
aid of a wrench and counter-wrench.
FAN ASSEMBLY DIAGRAM
20
ONE STAGE LIGHT OIL BURNERS
N.B. Ignition can be improved under
certain working conditions by
slightly adjusting the position of the
electrodes.
MOD.
BTL 14
BTL 20
BTL 26
- Observe the measurements indicated in the diagram
when fitting the fan.
N° 0002934112
Rev. 10/02/2004
A B C D
5 0,5-1 5-5,5 3,5-5
4,5 0,5-1 5-5,5 3,5-4
6,5 0,5-1 5-5,5 3,5-4
N° 0002934540
Rev. 04/04/2005