Iphone And Smartphone; Iphone With Lightning Connector; Iphone With 30-Pin Connector - Pioneer AVH-X491BHS Manual De Instrucciones

Connection
3
1
2
5 5
3
2
1
7 7
3
2
1
9 9
With internal amp
Important
Front speaker and Rear speaker signals (STD) or middle range
speaker and high range speaker signals (NW) are output from
the speaker leads when this connection is in use.
3
1
2
9 9
1 System remote control
Connect to Blue/white cable.
2 Power amp (sold separately)
3 Connect with RCA cable (sold separately)
4 To Rear output (STD)
To middle range output (NW)
5 Rear speaker (STD)
Middle range speaker (NW)
6 To Front output (STD)
To high range output (NW)
7 Front speaker (STD)
High range speaker (NW)
8 To subwoofer output (STD)
To low range output (NW)
9 Subwoofer (STD)
Low range speaker (NW)
Please select the appropriate speaker mode between stan-
dard mode (STD) and network mode (NW).
 Refer to On first-time startup on page 8

iPhone and smartphone

 For details on how to connect an external device using a
4
separately sold cable, refer to the manual for the cable.
 For details concerning the connection, operations and
compatibility of iPhone, refer to Setup for iPod / iPhone or
smartphone on page 16.
 For details concerning the connection and operations of
6
Android device, refer to Setup for iPod / iPhone or smartphone
on page 16.
iPhone with Lightning
connector
8
Connecting via the USB port
1
2
8
1 USB port
2 USB cable 1.5 m (4 ft. 11 in.)
3 USB interface cable for iPod / iPhone (CD-IU52) (sold
separately)

4 iPhone with Lightning connector

iPhone with 30-pin connector

Connecting via the AUX input
1
3
1 USB port
4
2 AUX input
3 USB cable 1.5 m (4 ft. 11 in.)
4 USB interface cable for iPod / iPhone (CD-IU201V) (sold
separately)
5 iPhone with 30-pin connector
Connecting via the USB port
3
1
2
1 USB port
2 USB cable 1.5 m (4 ft. 11 in.)
3 USB interface cable for iPod / iPhone (CD-IU51) (sold
separately)
4 iPhone with 30-pin connector
5
2
4
4
3
53