Listening to the radio
You can listen to a radio station either by
selecting a preset station, or by manually tuning
in the station.
Listening to a preset station
— Preset Tuning
Before tuning to preset stations, be sure to preset
them (see "Presetting radio stations" on
page 19).
1
Press TUNER/BAND repeatedly to
select "FM" or "AM".
2
Press TUNING MODE on the remote
repeatedly until "PRESET" lights up in
the display.
3
Turn TUNING +/– clockwise or
counterclockwise (or press –. or
>+ on the remote repeatedly) to
select the preset station you want.
Preset number
Listening to a non-preset
radio station
— Manual Tuning
1
2
3
Tips
• When an FM stereo program has static noise, press
• To record the radio programs, see "Recording on a
• You can also press FUNCTION on the remote
• To improve broadcast reception, adjust the supplied
Frequency
Press TUNER/BAND repeatedly to
select "FM" or "AM".
Press TUNING MODE on the remote
repeatedly until "MANUAL" lights up in
the display.
Turn TUNING +/– clockwise or
counterclockwise (or press –. or
>+ on the remote repeatedly) to tune
in the station you want.
FM MODE on the remote repeatedly until "MONO"
lights up in the display. There will be no stereo effect,
but the reception will improve.
tape manually" (page 25) or "Timer recording radio
programs" (page 35).
repeatedly to select "TUNER".
antennas, or connect an external antenna.
21
GB