SATA 51071 Manual Del Uso página 13

electric tool will make your work more efficient and safer.
2） The electric tool shall not be used if the switch is unable to turn on/off the power. Electric tools that cannot be controlled with s
witches are dangerous and shall be repaired.
3）Before making any adjustments, replacing the accessories or storing the electric tool, remove the plug from the power supply and/
or disengage the battery box from the tool. This protective measure will reduce the risk of accidental start of tool.
4）Place the unused electric tool out of reach of children, and do not let the electric tool operated by the people who are not familiar
with the electric tool or who do not understand these instructions. The electric tool is a potential threat in the hands of untrained
users.
5）Maintenance of electric tool Check whether the moving parts are adjusted in place or stuck, and check the parts for damage and
other conditions that affect the operation of electric tool. The damaged electric tool shall be repaired before use. Many accidents are
caused by poorly maintained electric tools.
6）Keep the cutting tool sharp and clean. Well-maintained tools with sharp cutting edges are not easy to get stuck and easy to control.
7） Use the electric tool, accessories, cutter bit, etc. in accordance with the instructions, taking into account the operating conditions
and works to be performed. Applying the electric tool for operations that do not match the purpose may be dangerous.
General safety warning of electric tool - use and precautions of battery tool：
1） Charge the battery only with the charger specified by the manufacturer. Incompatible charger and battery pack may cause the risk
of fire.
2） Use the electric tool only if a dedicated battery box is provided. Other battery packs may cause the risk of damage and fire.
3） When the battery box is not in use, keep it away from other metal objects, such as the clip, coin, key, nail, screw, to prevent one end
from being connected to the other end. A short circuit between the terminals of battery may cause a fire.
4）The abuse will make the electrolyte splash out of the battery. Keep off the electrolyte. In case of accidental touch, rinse it with water.
In case of splash into the eye, seek the medical assistance. Electrolyte spilled from the battery may cause the corrosion or burning.
General safety warning of electric tool - repair：
1） Have the qualified maintenance personnel to repair the electric tool with the same spare parts. This will ensure the safety of the
electric tool being repaired.
Professional requirements：
1 ）Be sure to take out the battery pack before repairing the machine.
2 ）Do not place the machine in the rain or water.
3 ）Do not store the battery pack above 40° C.
4 ）Charge the battery at an ambient temperature 0~30° C, preferably 18~24° C.
5 ）Only use the accompanying charger and battery pack.
6 ）Avoid the short circuit of battery pack （ for example: do not make the bolts and nails touch the positive and negative poles of
battery pack） .
7 ）Do not burn the battery pack or discard it in the fire. Otherwise, an explosion may occur.
8 ）Do not charge the damaged battery pack.
9 ）Replace the damaged power cord of charger timely.
10） Be sure to pull the plug of charger off before removing the battery pack.
11 ） During the charging, it is normal for the charger and battery pack to heat up.
12）When the machine is not in use, do not insert the charged battery pack into the charger.
13） After the charging is over, please pull the battery pack off the charger immediately.
14） During the operation, it is normal for the body and battery pack to heat up.
15） Do not put the discarded battery pack in fire or dispose it with domestic garbage, but be sure to send it to the local collection station
or recovery point.
51071/51072
中文
EN DE RU KO PT JA ES
13