Safety Definitions; General Safety; Work Area Safety; Electrical Safety - Stanley NB08PT-18 Traducción A Partir De Instrucciones Originales

E N G L I S H
This instruction manual must be read by any person installing or operating this tool with particular
attention to the following safety rules.

1. SAFETY DEFINITIONS

The definitions below describe the level of severity for each signal word. Please read the manual and pay
attention to these symbols.
DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or
serious injury.
CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or
moderate injury.
WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or
serious injury.
NOTICE: Indicates a practice not related to personal injury which, if not avoided, may result in property
damage.
Denotes risk of electric shock
Denotes risk of fire
Improper operation or maintenance of this product could result in serious injury and property damage.
Read and understand all warnings and operating instructions before using this equipment. When using
power tools, basic safety precautions must always be followed to reduce the risk of personal injury.
1.1

GENERAL SAFETY

WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instruc-
tions may result in electric shock, fire and/or serious injury.
SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE
The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery-operated
(cordless) power tool.
•
Do not use outside the design intent of Placing STANLEY Engineered Fastening Blind Fasteners.
•
Use only parts, fasteners, and accessories recommended by the manufacturer.
•
Use Power Tool only with specifically designated battery packs.
1.2

WORK AREA SAFETY

• Keep work area clean and well lit. Cluttered or dark areas invite accidents.
•
Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids,
gases or dust. Power tools create sparks which may ignite the dust or fumes.
• Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.
1.3

ELECTRICAL SAFETY

•
Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of
electric shock.
• Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
• Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of
electric shock.
6