Machine Description - Garland CHIPPER 1190 QG-V17 Manual De Instrucciones

5. MACHINE DESCRIPTION

5.1. CONDITIONS OF USE
The chipper is only designed to shred pieces of wood with a maximum diameter of 6cm. It is prohibited
to shred any other material (for example metal, stones, plastics and any other material). If you want to shred
roots, remove the sand, mud or other residues before shredding. Any other use of the shredder not described
here, annuls the warranty responsibility of the manufacturer. Do not use this machine for any other purpose not
intended. The use of this machine for other than the designated operations may result in dangerous situations.
Utilice esta máquina en el exterior, en ambientes secos y temperaturas entre 5ºC y 45ºC.
Remember that the machine operator is responsible for the dangers and accidents caused to other people or
things. The manufacturer shall not be in any case responsible for damages caused by improper or incorrect use
of this machine.
5.2. DETAILED DESCRIPTION OF THE PRODUCT
1. Hopper
2. Hopper handle
3. ON/OFF switch
4. Nozzer
5. Wheels
6. Leg
7. Discharge chute
8. Starter Handle
9. Exhaust
10. Air fi lter
11. Fuel tank
12. Plastic cover
13. Trailer coupling
Images and drawings in this manual are approximate and may not correspond with the actual product.
1
10
9
8
7
6
33/148
12
11
English
2
4
3
13
5