Placing Decorative Wood Block Set - Dovre VIRTUS 50 GAO Instrucciones De Instalacion Y Uso

Placing decorative wood
block set
The blocks are fragile, treat them with care.
The blocks must be placed on the burner
exactly as indicated in the photos.
Follow the instructions below to place the blocks:
When positioning the wood block set, make sure that
the pilot flame and the second thermocouple remain
free. Position the components in the way shown in the
following figures.
The wood block set consists of eight ceramic wood
blocks, coals and filament.
1. Position the coals and the filament.
2. Position the wood blocks in the sequence dis-
played in the following figures:
D OVRE
10
Subject to change because of technical improvements