Cleaning And Maintenance - melitta Easy Therm Manual De Instrucciones

use of the appliance and have
understood the potential hazards.
• C hildren must not play with the
appliance
• R eplacement of the power cable
and all other repairs may only be
carried out by Melitta
mer Service or by an authorised
repair shop.
Insulated jug
• D o not use the jug in the micro-
wave.
• D o not place the jug on a hot
stove.
• D o not use the jug to store
dairy products or baby food,
as there is a risk of bacterial
growth.
• D o not lay the filled jug on its
side, as liquid may escape.
• C lean the outer casing with a
soft, damp cloth.
ONLY for plastic jugs with
glass insert
• T o prevent damage to the glass
flask, do not use hard or sharp-
edged objects (e. g. cutlery,
dishwashing brushes or similar)
for stirring or cleaning and
do not fill with ice cubes or
carbonated liquids.
• D o not subject the glass flask to
high temperature fluctuations.
2. Before first use
• Ensure that the power supply in your home
corresponds to that on the model plate on the
base of the appliance.
• Connect the appliance to a power source. Unused
cable can be stored in the base of the appliance .
• All appliances have been tested during production
to ensure they work perfectly. Therefore there may
be for example water deposits remaining. Rinse the
appliance twice with the maximum amount of water
and without a coffee filter or ground coffee, in order
to clean it.
• For the best coffee enjoyment and convenient use,
the appliance is equipped with various features.
These features are explained below.
3. Making coffee
• Ensure that the appliance is connected to the power
Custo-
®
source.
• Open the lid on the water tank. 
• Fill the water tank with the desired amount of water
using the therm jug. With the help of the water level
display on the tank  you can choose the correct
number of cups. Small cup symbol = approx. 85ml
coffee per cup, large cup symbol = approx. 125 ml
coffee per cup.
• Close the lid on the water tank and place the therm
jug with closed lid in the appliance.
• Open the swivel filter  to the left.
• Fold a Melitta
and place it in the filter holder.  Press the filter bag
into the filter holder by hand, to ensure a good fit.
• Put the ground coffee into the filter. The amount
depends on your personal taste. We recommend
using 6g of ground coffee per large cup.
• Swivel the filter back into the appliance.
• Turn the appliance on . Brewing begins.
• The appliance turns off automatically 15 minutes
after it has been turned on. This avoids unnecessary
use of electricity and saves energy. You can of course
turn the machine off manually at any time.
• The drip stop  prevents your coffee from dripping,
when you remove the jug from the appliance.
4. Using the insulated pot
• The brewed coffee flows through the central valve in
the insulated lid of the pot.
• To pour coffee press down on the sealing lever.
• Remove the lid simply by pressing the seals on the
side while lifting the lid up .

5. Cleaning and maintenance

External cleaning
• The appliance housing and the external parts of the
therm jug can be cleaned with a soft damp cloth.
• The swivel filter is detachable  and can be cleaned
in the dishwasher.
• The therm jug should be rinsed with hot water after
each use. Stubborn coffee stains can be removed
with "Perfect Clean Accessories" from Melitta
Do not use hard or abrasive objects, which could
damage the glass flask.
Descaling
Depending on water hardness the appliance can
become calcified with use. This also increases the
appliance's energy consumption as lime scale on the
heating element can prevent the water heating
effectively. To avoid damage the appliance must be
descaled regularly.
The descaling process consists of 2 steps, both of
which must be completed.
filter bag 1x4
at the embossed seam
® ®
GB
.
®
7