Cleaning And Maintenance - melitta LOOK Pe Instrucciones De Uso

Hardness setting
°dH
Flash rhythm
GB
CALC button 
Table 1
Warming time setting
Flash rhythm
button 
ON/OFF
Table 2
large cup symbol = approx. 125 ml coffee per cup.
• Close the lid on the water tank and place the glass
pot with closed lid in the appliance.
• Open the swivel filter  to the left.
• Fold a Melitta
®
and place it in the filter holder . Press the filter
bag into the filter holder by hand, to ensure a good
fit.
• Put the ground coffee into the coffee filter. We
recommend using 6-8 g of coffee per large cup at a
medium setting of the AromaSelector
• A lternatively, you can vary the taste of the coffee
according to your personal preference using the
same quantity of coffee. For a milder coffee, turn
the AromaSelector
coffee, turn it to the right (
• Turn the appliance on . Brewing begins.
• After making your coffee the hotplate will keep it
warm and will turn off automatically after the time
you have set (see point 4). This avoids unnecessary
use of electricity and saves energy. You can of course
turn the machine off manually at any time.
• The drip stop prevents your coffee from dripping,
when you remove the pot from the appliance .
• With the help of the detachable inner filter you can
dispose of the filter bag simply and easily .

6. Cleaning and maintenance

External cleaning
• Switch off the machine before cleaning and disconnect
the power cable.
• Allow the appliance to cool completely before
cleaning it.
• Clean the parts that come into contact with coffee
(jug, filter holder, etc.) after each use.
• The housing can be cleaned with a soft damp cloth.
• The glass pot and lid, the filter insert and the swivel
filter can be washed in the dishwasher.
• When cold, the hotplate can be cleaned with a soft
damp cloth.
• Do not use harsh or abrasive cleaning agents.
Descaling
The CALC button  lights up again if the appliance has
been turned off without descaling. The CALC
button will go off again only after the descaling
10
1
<7°
dH
............
20 minutes
............
filter bag 1x4
at the embossed seam
®
.
®
to the left ( ). For a stronger
®
).
2
14-21°
7-14° dH
dH
............ ............
40 minutes 60 minutes
............ ............
programme has been completely finished.
Based on the water hardness level you have set (see
point 3) the descaling programme should be run
promptly after the CALC button  lights up.
• Follow the manufacturers instructions regarding
amounts and pour the descaler into the water tank.
We recommend using Melitta
Filter Coffee & Aqua Machines".
• Briefly press the CALC button , it will start to
flash.
• The descaling process will now run automatically.
To remove even stubborn limescale the descaling
process takes 25 minutes.
• Attention: Only by carrying out the descaling
process completely will all limescale deposits be
removed and the light on the CALC button will go
off. The descaling process should therefore not be
interrupted before it has run for the full 25 minutes.
• When the descaling process is completed the light
on the CALC button will go off. The appliance will
turn off automatically.
• At the end of the descaling process, the appliance
should be rinsed twice through, using the maximum
amount of water without coffee. This will remove
any remaining limescale deposits.
7. Notes on disposal
• Appliances labelled with this symbol
to European guidelines for WEEE (Waste Electrical
and Electronic Equipment.
• Electric appliances do not go in the household bin.
Dispose of the appliance in an environmentally
friendly way using suitable collection systems.
• Packaging materials are raw materials and can be
recycled. Please recycle them.
3 4
>21°
dH
............
"Anti Calc Liquid for
®
are subject