General Safety Instructions - ABB EOH361K Manual Del Usuario

Ocultar thumbs Ver también para EOH361K:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

General safety instructions

Read these safety instructions carefully before using this product!
1
1/2 General safety instructions | Instruction Bulletin EOH361K/NK, EOH362K/NK, EOH363K/NK, 1SCC340029M1402 / B
DANGER
HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH
– Apply appropriate personal protective equipment (PPE) and
follow safe electrical work practices. See NFPA 70E or CSA
Z462.
– This equipment must only be installed and serviced by
qualified electrical personnel.
– Before performing visual inspections, tests, or maintenance
on the equipment, disconnect all sources of electric power.
Assume that all circuits are live unless they are completely
deenergized, tested, grounded, and tagged. Pay particular
attention to the design of the power system. Consider all
sources of power, including the possibility of backfeeding.
– Never operate energized switch with door open.
– Turn off switch before removing or installing fuses or making
load side connections.
– Always use a properly rated voltage sensing device at all line
and load fuse clips to confirm switch is off.
– Turn off power supplying switch before doing any other work
on or inside switch.
– Do not use renewable link fuses in fused switches.
Failure to follow these instructions will result in death or
serious injury.

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Eoh361nkEoh362kEoh362nkEoh363kEoh363nk

Tabla de contenido