Adjusting the sound balance
1
2
Indication [Range]
FAD*
*
(fader)
1,
2
Adjust the front and rear speaker balance.
[R06 to F06]
BAL*
(balance)
2
Adjust the left and right speaker balance.
[L06 to R06]
SUB.W*
(subwoofer)
3
Adjust the subwoofer output level. [00 to 08]
VOL (volume)
Adjust the volume. [00 to 30 or 50*
1
*
If you are using a two-speaker system, set the
fader level to "00."
*
2
This adjustment cannot affect the subwoofer
output.
*
3
This takes effect only when a subwoofer is
connected.
*
4
Depending on the amplifier gain control
setting. (See page 18 for details.)
Using SRS Circle Surround Auto
SRS Circle Surround Auto
technology specially aimed for car audio, and
it can reproduce 5.1-channel sound system
through conventional 4-door mounted speaker
system (with or without subwoofer.)
SRS Circle Surround Auto
SRS Circle Surround II
Converts the sound of CD, AM/FM radio
broadcast and other various source into multi-
channel sounds.
SRS FOCUS®:
Elevates the sound field to a more optimal
listening level.
SRS TruBass®:
Creates an ultra rich bass using the standard
speakers with no subwoofer connected.
4
]
To select a preset mode of SRS Circle Surround
TM
Auto
TYPE A : For the system of large front
TYPE B : For the system of large front
TYPE C : For the system of small front
USER
OFF
(CS-A mode)
TM
is a surround
TM
is made of...
TM
decoder:
TYPE A
TYPE B
OFF
USER
speaker with tweeter and rear
tray speaker.
speaker with tweeter and door-
mounted rear speaker.
speaker and door-mounted
rear speaker.
: For your preference.
: Cancels CS-A mode.
To be continued...
TM
TYPE C
15