JVC KD-HDR1 Manual De Instrucciones página 9

To tune in to a station manually—
Manual Search
Before starting Manual Search, select
"MANUAL" for "S MODE".
(See page 18.)
In step ! on page 8...
1
2 Select the desired station frequencies.
• The unit starts HD Search when you press
MODE, then press 4
To search for HD Radio stations only—
HD Search
Before starting HD Search, select "HD
SEEK" for "S MODE". (See page 18.)
In step ! on page 8...
When an HD Radio station is received,
searching stops.
• The unit starts Manual Search when you
press MODE, then press 4
briefly.
/¢ briefly.
/¢
When an FM stereo broadcast is hard to receive
Lights up when monaural mode is activated.
Reception improves, but stereo effect will be lost.
To restore the stereo effect, repeat the same
procedure. "MONO OFF" appears and the MO
indicator goes off.
To change the HD Radio reception mode
While receiving an HD Radio broadcast,
received signals may alternate between digital
and analog due to the receiving condition.
If you want to cancel this function, follow the
procedure below.
While listening to an HD Radio station...
1
2
Lights up when holding the reception digital,
flashes when holding the reception analog.
DIGITAL : For playing digital audio only.
ANALOG : For playing analog audio only.
AUTO : For automatic switching between
digital and analog audio.
• If no sound comes out with current setting
selected, change the setting to ANALOG or
DIGITAL.
• The setting automatically returns to AUTO in
the following cases:
– When you tune in to another station.
– When you change to another source.
– When you turn off the power.
• This setting cannot affect conventional FM/
AM stations.
• If the radio station forces the reception mode
to digital, the HOLD indicator flashes.
HOLD indicator lights up.
9