JVC KD-HDR1 Manual De Instrucciones página 18

Indications
SCROLL* 1
Scroll mode
WOOFER
Subwoofer cutoff
frequency
EXT IN* 2
External input
TAG DISP
Tag display
BEEP
Key-touch tone
AMP GAIN
Amplifier gain
control
AREA
Tuner channel
interval
S MODE
Radio station
search mode
IF BAND
Intermediate
frequency band
CS ON HD
CS-A mode standby
on HD Radio
* 1 Some characters or symbols will not be shown correctly (or will be blanked) on the display.
* 2 Displayed only when one of the following sources is selected—FM, AM, or DISC.
18
Selectable settings, [reference page]
ONCE : [Initial]; Scrolls the information once.
AUTO : Repeats scrolling (5-second intervals in between).
OFF : Cancels.
• Pressing DISP for more than one second can scroll the display regardless
of the setting.
LOW : Frequencies lower than 90 Hz are sent to the subwoofer.
MID : [Initial]; Frequencies lower than 135 Hz are sent to the
subwoofer.
HIGH : Frequencies lower than 180 Hz are sent to the subwoofer.
CHANGER : [Initial]; To use a JVC CD changer, [11], a JVC
compatible satellite (SIRIUS/XM) tuner, [19], an Apple
iPod or a JVC D. player, [22].
EXT IN : To use any other external component than the above, [24].
TAG ON : [Initial]; Shows the Tag information while playing MP3/
WMA tracks, [13].
TAG OFF : Cancels.
ON : [Initial]; Activates the key-touch tone.
OFF : Cancels.
You can change the maximum volume level of this unit.
LOW PWR : VOL 00 – VOL 30 (Select this if the maximum power
of the speaker is less than 50 W to prevent them from
damaging the speaker.)
HIGH PWR : [Initial]; VOL 00 – VOL 50
OFF : Deactivates the built-in amplifier.
AREA US : [Initial]; When using the unit in North/Central/South
America. AM/FM intervals are set to 10 kHz/200 kHz.
AREA SA : When using the unit in South American countries where
FM interval is 100 kHz. AM interval is set to 10 kHz.
AREA EU : When using the unit in any other areas. AM/FM intervals
are set to 9 kHz/50 kHz (100 kHz during auto search).
You can change radio station search mode operation using the
4
/¢ buttons.
MANUAL : [Initial]; To search for a station manually—for Manual
search, [9].
HD SEEK : To search for an HD Radio station only—for HD search, [9].
AUTO : [Initial]; Increases the tuner selectivity to reduce interference
noises between the stations. (Stereo effect will be lost.)
WIDE : Subject to the interference noises from adjacent stations,
but sound quality will not be degraded. (Stereo effect will
not be lost.)
AUTO : Automatically activates "USER" for the CS-A mode when
the CS-A mode is set to "OFF", and the unit receiving a
radio broadcast encoded with CS II.
OFF : [Initial]; Cancels.