Assembly when Making Sorbet
1. When assembling the Platino Plus to make sorbet, repeat step 1 in the
"Assembly when Slow Juicing" section (page 6).
2. Assemble the Dessert Drum to the Bowl. (Figure 1)
a. Make sure the red dot on the Dessert Drum lines up with the red dot on
the Bowl.
1
3. Place the Auger in the center of the Dessert Drum. (Figure 2)
a. Twist the Auger clockwise until it drops into place.
2
4. Place the Food Chute onto the Bowl.
a. Make sure the white dot on the top of the Food Chute is aligned with the
red dot on the Bowl. (Figure 3)
3
b. Turn the Food Chute clockwise until the lid clicks into the locked position.
The arrow on the Food Chute will line up with the arrow on the Base.
(Figure 4)
4
10