Operation; Assembly When Slow Juicing - Fagor PLATINO PLUS Manual De Instrucciones

Operation

The Platino Plus is virtually assembled straight out of the box. We suggest taking
it apart and washing the removable parts in warm water with non-abrasive liquid
detergent before the first use. Rinse thoroughly with warm water and allow to
air dry. This will eliminate any traces of dust or residue from manufacturing or
shipping. Never submerge the Platino Plus Base in water or any other liquid.

Assembly when Slow Juicing

1. Assemble the Bowl to the Base. (Figure 1)
a. Make sure the Bowl fits all the way into the shell of the Base.
b. Align the arrow on the Bowl with the arrow on the Base. (Note: If the Bowl
is not completely lowered onto the Base, the machine will not start.)
1
c. Under the Bowl there is a silicone pad (Figure 2) that prevents juice from
exiting through the Sorbet/Pulp Ejector. When juicing, make sure the
silicone pad is firmly in place. When cleaning the Bowl, make sure to slide
the pad out and run water through the Sorbet/Pulp Ejector to remove
excess food debris.
2
6