Replacing Components - MBM PLG74TG Manual De Uso E Instalación

Before proceeding see chap. 2
1. Remove the oil/ash container / 2. Di-
sassemble the panel and the knob
REPLACING GAS TAP
Unscrew the gas inlet and outlet
1.
connections
Unscrew the thermocouple
2.
Reassemble the new tap
3.
Check the idle screw (see Techni-
4.
cal Data Tables)
REPLACING THERMOCOUPLE
Unscrew the thermocouple from
1.
the tap
Unscrew the thermocouple from
2.
the pilot
Fit the new thermocouple and
3.
screw the connections
REPLACING IGNITION SPARK
Remove the high-voltage cable of
1.
the spark
Unscrew the nut
2.
Replace the spark new
3.
Connect the high voltage cable
4.
THE PRESENT MANUAL IS PROPERTY OF THE MANUFACTURER. ANY REPRODUCTION, EVEN PARTIAL, IS PROHIBITED.

REPLACING COMPONENTS

REPLACING PIEZO
Remove the cable from the piezo
1.
electric ignitor
Remove the ignitor to replace
2.
Fit the new piezo electric ignitor
3.
REPLACING BURNER
Remove the grills, lava stone, lava
1.
stone grills and splash guards in
sequence
Unscrew the fixing screws
2.
Remove the burner
3.
Position the new burner
4.
Tighten the fixing screws
5.
In models with a double bur-
ner, unscrew the burner plate
that is to be replaced (Part. A) and
retighten it on the new one as
shown in Part. B / see SECT. IMA-
GES - REF. r)
When placing the removed
parts back, do not invert their
position
Once completed, refit:
1. Oil/ash container
2. Panel and knob
- 15 -
7.
EN