Recording With Ease For Beginners (Easy.q Mode); Grabación Con Borrado Para Principiantes (Mode Easy.q) - Samsung VP-D963 Manual De Instrucciones

Videocámara digital
Tabla de contenido

Publicidad

ENGLISH
Basic Recording

Recording with Ease for Beginners (EASY.Q Mode)

✤ The EASY.Q function works only in <Camera> mode. ➥page 19
✤ The EASY.Q function allows a beginner to easily make good
recordings.
1. Set the [Power] switch to [CAMERA].
2. Set the [Mode] switch to [TAPE].
3. By pressing the [EASY.Q] button, all functions on the
Camcorder will be set to off and the recording
settings will be set to the following basic modes:
I
The words <EASY.Q> and <DIS (
displayed at the same time.
4. Press the [Start/Stop] button to start recording.
I
Recording will begin using the basic automatic
settings.
5. Press the [EASY.Q] button again in the STBY mode
and then turn the EASY.Q mode off.
I
The EASY.Q function will not turn off while you are
recording.
I
The Camcorder will return to the settings that
were set prior to activating EASY.Q mode.
[ Notes ]
I
In EASY.Q mode, certain functions are not available,
such as Menu, BLC, Manual focus.
If you want to use these functions, you must first turn
the EASY.Q mode off.
I
The EASY.Q mode settings are deleted when the
Battery Pack is removed from the Camcorder and
must be reset when the Battery Pack is replaced.
I
Taking a still image using the [PHOTO] button while
EASY.Q is set releases DIS function.
I
Digital Zoom, COLOR NITE or Visual Effect is not
available in the EASY.Q mode.
I
16:9 Wide is not available in the EASY.Q mode.
(VP-D963(i) only)
I
[PHOTO] button is not available when in 16:9 Wide mode and
EASY.Q is activated in 16:9 Wide mode.
(VP-D964W(i)/D965W(i) only)
1
)> are
3
STBY
Grabación básica
Grabación con borrado para principiantes (Modo EASY.Q)
✤ La función EASY.Q sólo está operativa en el modo <Camera> (Cámara).
➥pág. 19
✤ El modo EASY.Q permite a los principiantes obtener buenas grabaciones
con facilidad.
1. Coloque el interruptor [Power] en [CAMERA].
2. Coloque el interruptor [Mode] en [TAPE].
3. Pulse el botón [EASY.Q] para que se desactiven todas
las funciones de la videocámara. Los ajustes de
grabación se acomodarán a los siguientes modos
básicos:
I
Las palabras <EASY.Q> y <DIS (
mismo tiempo.
4. Pulse el botón [Iniciar/detener]para comenzar la
grabación.
I
La grabación empieza con los ajustes automáticos
básicos.
5. Pulse de nuevo el botón [EASY.Q] en e modo STBY y
se desactivará el modo EASY.Q.
I
La función EASY.Q se desactivará cuando esté
grabando.
I
La videocámara volverá a los ajustes definidos
antes de activar el modo EASY.Q.
[ Notas ]
I
En el modo EASY.Q, algunas funciones no están
disponibles, como el menú, BLC y el enfoque manual.
Si desea usar estas funciones primero deberá
desactivar el modo EASY.Q.
0:00:10
SP
I
Los ajustes del modo EASY.Q se suprimirán cuando se
60min
quite la batería de la videocámara y deberán ajustarse
de nuevo al volver a colocarla.
I
La captura de imágenes fotográficas utilizando el botón
[PHOTO] con EASY.Q definido, libera la función DIS.
Digital Zoom (Zoom Digital), COLOR NITE o Digital
I
Effect (Efecto digital) no están disponibles en el modo
EASY.Q.
I
16:9 Wide (16:9 Panorámica) no está disponible en el
modo EASY.Q. (sólo VP-D963(i))
I
El botón [PHOTO] no está disponible en modo 16:9 Wide (16:9
Panorámico) y cuando EASY.Q está activado en modo 16:9 Wide
(16:9 Panorámico). (sólo VP-D964W(i)/D965W(i))
ESPAÑOL
)> aparecen al
35
35

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Vp-d963iVp-d964wVp-d964wiVp-d965wVp-d965wi

Tabla de contenido