EINHELL DL-MH Manual De Instrucciones De Operación Y Mantenimiento página 37

Anleitung DL-SS 09.03.2004
Dear Customer,
Before you use the impact screwdriver for the first
time, please read these instructions and note the
information for the tool's operation and maintenance.
Always keep this manual with the tool.
1. Items supplied
1 impact screwdriver 1/2" with hammer action
1 plug-in nipple R 1/4"
2. Technical data
Release torque max.
Working range (max. thread size)
Permissible working pressure max.
Noise emission to DIN 45 635
Sound power level L WA/max. C 103 dB(A)
Workplace-related
emission value L
PA/max.
Maximum measuring-surface impulse
sound pressure level L 1m
PA/Max.
Vibration (under load)
to DIN EN 28662 Part 1
and E DIN ISO 8662 Part 7
Square drive
Air consumption approx. 113 l/min.
Recommended hose diameter internal
Air quality cleaned and oiled
Air supply
via conditioning unit with filter pressure reducer
and mist oiler
Compressor capacity
approx. 250 l/min. equivalent to a motor
rating of 2.2 kW
Work settings
6 bar working pressure set at the pressure
reducer or filter pressure reducer
9:21 Uhr Seite 5
Please note:
When working with the impact screwdriver, be
sure to wear the necessary protective clothing.
Observe the safety regulations.
3. Illustration
24
6
312 Nm
M14
6 bar
Part 20
15
93 dB(A)
Item. Description
6 trigger lever
15 air regulator / torque regulator
90 dB(A)
17 selector pin Forward/Reverse
3.1 m/s
2
24 square drive for nut socket
(mounting shaft)
49 plug-on nipple for the air supply
1/2 inch
4. Proper use
Ø 9 mm
The impact screwdriver is a handy pneumatic tool for
use in DIY and automotive workshops. It is ideal for
fastening and releasing threaded connections on
motor vehicles (wheels etc.) and on farming
equipment.
The exhaust air leaves the tool through the outlet to
the bottom. The drive sockets, bits and extension
bars with lock pin and rubber retaining ring are in
accordance with DIN. The drive sockets and bits can
be changed quickly and easily. The air supply is
connected by means of a plug-in nipple and a quick-
release coupling.
Repairs and maintenance work are to be carried out
only by authorized specialist workshops.
GB
17
49
5