Chicco Soft&Dream Instrucciones De Uso página 17

PARENT-FACING AND FRONT-FACING MODE
HOW TO WEAR THE BABY CARRIER
your baby inside.
front-facing mode. (diag. 20)
10. Put the baby carrier on by putting your head through
the shoulder strap crossover (diag. 10).
fastened properly.
shoulder straps until they fit comfortably against your
body.
Then use the lumbar support adjuster (M) on the end of the
lumbar support to adjust the length of the straps until it fits
comfortably against your body (diag. 12).
shoulder strap crossover should be positioned in the middle
can be regulated using the adjuster ring (L).
HOW TO PLACE YOUR BABY INSIDE THE CARRIER
side the carrier.
PARENT-FACING MODE
corresponding upper safety clasp on one side of the baby
carrier only (diag. 14). Check that both safety clasps are fa-
stened properly.
15. Place your baby through the open end of the baby car-
rier (diag. 15).
rations. Check that the baby's legs are positioned on either
side of the seat and his arm is threaded correctly through
the slot.
to the corresponding upper safety clasp on the other side
of the baby carrier only (diag. 16B). Check that both arms
are slotted through the armholes and both safety clasps are
fastened correctly.
17. Adjust their length until you find a safe and comfy po-
area and the leg slots so that the baby carrier is never too
17).
gram 18.
around the baby's face to ensure correct air circulation.
19. Support the base of the baby carrier to regulate the
maximum comfort and safety for both you and your baby.
(diag. 19).
FORWARD-FACING MODE
can then carry him around in front-facing mode.
side of the baby carrier only (diag. 21). Check that the safety
clasp is fastened properly.
22. Accommodate your baby through the open end of the
baby carrier (diag. 22).
rations. Check that the baby's legs are positioned on either
side of the seat.
other side of the baby carrier (diag. 23). Check that the safety
clasp is fastened properly.
Check that the safety clasps are fastened properly.
25. Adjust their length and that of the capacity straps until
you find a safe and comfy position for your baby. It is also
for your baby's build (diag. 25).
26. Support the base of the baby carrier to regulate the
mum comfort and safety for both you and your baby. 26).
HOW TO REMOVE YOUR BABY FROM THE CARRIER
WHEN USED IN PARENT-FACING AND FRONT-
FACING MODE
from the carrier.
27. Firmly support your baby and release the safety clasp lo-
-
HORIZONTAL MODE
from the carrier.
safety clasps first (Diag. 28A) and then those fitted at the
-
FABRIC HOOD
of the baby carrier (diag. 30).
-
-
17
-