Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
DATE & TIME SET PROCEDURE
1. To adjust the date/time, press the Set button
located on the side of the monitor.
2. The display will show a blinking number showing
the month. Change the month by pressing the
button. Each press will increase the number by one
in a cycling manner. Press the Set button
to confirm the entry, and the screen will show a blink-
ing number representing the day of the month.
3. Change the date and time as described in Step 2
above, using the
bers and the Set button
repeat process to set date and time
again
button to change the num-
to confirm the entries.
Press the
button
blinking month
increasing month
confirm the entry
13
USING THE ARM CUFF
,
Very Important: Proper cuff size is critical to accurate
measurement.
This monitor comes with two sizes of arm cuffs:
Standard Size Fits 9"–13" (23 cm – 33 cm)
Large Size Fits 13"–17" (33 cm – 43 cm)
The appropriate cuff is suitable for your use if the
colored arrow falls within the solid color line as
shown below.
1. If the cuff is not assembled, pass the end of the
cuff furthest away from the tubing through the metal
D-ring in order to form a loop. The smooth side
without the felt material should be on the inside of
the cuff loop.
Colored Arrow
Standard
Size Cuff Fits:
End of cuff
MODEL# PP-BPCUFF5
Center tube over
middle of arm
D-ring
Solid Colored Line
14
Publicidad
Capítulos
Tabla de contenido
