Clearing Values From Memory - HoMedics Walgreens 518729 Manual Del Usuario

To choose the memory
information to be displayed:
1. Press and hold the "MEM" button
for 3 seconds. Release the button
when the "MEMORY SELECT"
box begins flashing on the display.
2. Toggle through memory mode
options by pressing the "MEM"
button again. Each new press
and release of the button will
display a new memory mode as
shown to the right.
3. Once the desired memory mode
appears inside the "MEMORY
SELECT" box on the display:
Do not press any buttons for
three seconds and the mode
will be confirmed.
You may also press the
"START/STOP" button to
confirm the mode selection
4. Once a selection is confirmed,
the monitor will remain in the
selected mode until it is
changed.
MEM
Press "MEM"
Press "MEM"
Press "MEM"
Press "MEM"
Press "MEM"
Press "MEM"
23
To use the memory function:
1. Press the User-Select button.
2. Choose User 1, User 2, or User 3.
3. Press the "MEM" button to access
the memory.
4. The monitor will display the information for the
memory mode selected.
5. If in "REVIEW" mode, every new press of the
"MEM" button will recall a previous reading. The
latest reading will be recalled first.

CLEARING VALUES FROM MEMORY

1. Press the User-Select button to select User 1, User 2, or
User 3.
2. Press and hold the date and time set buttons(
at the same time while in memory mode, then the data
for the selected user will be erased automatically.
MEM
24
)