Electrical Connection - Astralpool LumiPlus RGB-DMX Mini Manual Para La Conexión Eléctrica

ENGLISH
IMPORTANT: The instruction manual you are holding includes essential information on the safety measures to be im-
plemented for installation and start-up. Therefore, the installer as well as the user must read the instructions before
beginning installation and start-up.
Keep this manual for future reference.
To achieve optimum performance of the Projector LumiPlus Mini RGB-DMX, follow the instructions provided below:

1. ELECTRICAL CONNECTION

The projectors are supplied with a 2-wire 1.5mm2 Cu H07RNF cable.
This projector has been designed to operate only with a DMX control and with the DMX Mini power supply from AstralPool
(code 52142). It doesn't work with any other control system.
2. CONTROL SYSTEMS OF THE RGB-DMX LED PROJECTORS
The Mini or Quadraled LED projectors use 3 DMX channels, one for each of the 3 primary colours (red, green and blue).
The configuration of the DMX address should be performed from the DMX power supply of code 52142.
The mains lead 52142 allows the connection of up to a maximum of 9 Mini LEDs RGB-DMX projectors with independent
channels. This mains lead is responsible for adapting the input of 230V~AC to
These are dotted outputs, therefore it does not matter to which of them the projectors are connected.
See manual of the DMX mains lead code 52142 for information regarding how to assing
DMX addresses to each Mini LED projector or Quadraled and how to configure a system.
2
24V DC for the 6 outputs available.