Song Edit Mode; Tempo, Repeat Playback; Program Change, Bank Select - Yamaha DTXPRESS III Manual De Instrucciones

Song Edit Mode

This function edits the User Song (No. 96-127) that is
currently selected.
Entering the Song Edit Mode
Hold the [SHIFT] button and press the [SONG] button on the front
panel.
Once the Song Edit Mode is entered, the main page (Tempo, Re-
peat Playback) shown below will be displayed.
SONG
ƒ=120 Repeat=off
What's in the Song Edit Mode
The Song Edit Mode is divided into the following 9 pages.

1. Tempo, Repeat Playback ..................................... 25

2. Program Change, Bank Select ............................ 25

3. Volume, Pan ......................................................... 26
4. Song Copy ........................................................... 26
5. Quantize ............................................................... 26
6. Clear Track ........................................................... 27
7. Merge Track ......................................................... 27
8. Clear Song ........................................................... 27
9. Song Name .......................................................... 27
Procedure
1. Press the [SONG] button to enter the Song & Tempo dis-
play, then select the User Song (No. 96-127) you want to
edit.
2. Hold the [SHIFT] button and press the [SONG] button to
enter the Song Edit mode.
* If the [SHIFT]+[SONG] buttons are pressed when a preset
song is already selected, "CAN'T EDIT PRESET SONG" will
appear and the Song Edit Mode cannot be entered.
3. Use the [PAGEs]/[PAGEt] buttons to display the page
you want to edit.
* If the Utility Mode's [2-4. Jump To Recent Page] (P. 30) pa-
rameter is set to "on", The DTXPRESS III will display the
page last edited when entering the Song Edit mode.
4. Use the [SEL<]/[SEL>] buttons to move the cursor to
the parameter you want to edit. The parameter will flash.
* If there is only one parameter, it is not necessary to move the
cursor.
5. Use the [VALUE–]/[VALUE+] buttons to set the
parameter's value or ON/OFF setting.
Any settings made in the Song Edit Mode will directly
change the settings in the memory of the DTXPRESS III.
It is not necessary to use the Store Operation.
1. Tempo, Repeat Playback
This function changes the tempo (rewrites the tempo information
in the song's header) and sets the repeat playback of the user song.
SONG
ƒ=120 Repeat=off
q
q q (Tempo)
[Range] 30-300
w Repeat (Repeat Playback)
[Range] off, on
If this is set to "on", the user song will repeat playback.
If this is set to "off", the user song will play normally.
2. Program Change, Bank Select
This function changes the voices that will be used for each MIDI
channel in the user song (rewrites the voice information in the
song's header). This program change will be transmitted when a
song is selected and when song playback is stopped.
q
SONG Ch 1=off
PCNo=--- V=-----
e
q MIDI Channel
[Range] Ch1-Ch16
w Program Change Transmit On/Off
on: Transmits.
off: Does not transmit.
e PCNo (Program Change Number)
[Range] 1-128
r V (Bank Select)
[Range] meldy, drumV
Sets the bank that will be switched.
meldy: Transmits the melody voice program change (MSB=0).
drumV: Transmits the drum voice program change (MSB=127).
w
w
r
25