Sony VPL-CX86 Manual De Referencia página 18

Wired connection - when using Air Shot (wireless connection) function (VPL-
CX86 only)
1 Insert the supplied wireless LAN card.
2 Connect the AC power cord to a wall outlet.
3 Press the ?/1 (on/standby) key.
4 Press the AIR SHOT button on the remote commander.
5 Turn on the power the computer.
6 Confirm that the switch on the wireless LAN module is set to the WIRELESS LAN side,
and then insert the USB wireless LAN module into the computer.
Note
When the Air Shot is used for the first time, install the Projector Station for Air Shot Version 2 to the
computer from a wireless LAN module or CD-ROM.
2
2
1
1
6
Projecting
3
3
6
6
5
5
COMMAND
OFF ON
4
4
PIC
PJ NETWORK
MUTING
AUDIO INPUT
TILT/KEYSTONE
LENS
VOLUME
APA
MENU/
TAB AIR SHOT
FREEZE
Power
AIR SHOT