Troubleshooting - JVC KD-A815 Manual De Instrucciones

Troubleshooting

Sound cannot be heard from the
speakers.
The unit does not work at all.
"Connect Error" appears on the
display.
"AUX IN" cannot be selected.
Nothing appear on the display.
SSM automatic presetting does
not work.
Static noise while listening to the
radio.
"AM" cannot be selected.
Disc cannot be played back.
• CD-R/CD-RW cannot be played
back.
• Tracks on the CD-R/CD-RW
cannot be skipped.
• Disc can neither be played back
nor ejected.
• "No Eject" appears on the display.
Disc sound is sometimes
interrupted.
Disc cannot be recognized ("No
Disc," "CD Loading Error," or "Eject
Error" flashes).
"Please Eject" appears on the
display.
42 ENGLISH
Symptom Remedy/Cause
• Adjust the volume to the optimum level.
• Make sure the unit is not muted/paused (
• Check the cords and connections.
Reset the unit. ( 3)
Remove the control panel, wipe the connector,
then attach it again. (
Check the <Source Select> = <Aux Source>
setting. ( 33)
Check the <User> color settings. (
Store stations manually.
Connect the antenna firmly.
Check the <Source Select> = <AM Source>
setting. ( 33)
Insert the disc correctly.
• Insert a finalized CD-R/CD-RW.
• Finalize the CD-R/CD-RW with the component
which you used for recording.
• Unlock the disc. (
• Eject the disc forcibly. (
• Stop playback while driving on rough roads.
• Change the disc.
• Check the cords and connections.
Eject the disc forcibly. (
This occurs sometimes due to over-heating. Eject
the disc or change to another playback source.
3)
34, 35)
10)
3)
3)
6).