Features; Assembly - Homelite UT42100 Manual Del Operador

PRODUcT SPEcIFIcATIONS
Weight ......................................................................................................................................................................... 4.9 lbs.
Input .............................................................................................................................................. 120 V, AC only, 60 Hz, 7 A
Air Velocity:
MPH ...............................................................................................................................................................................150
KNOw yOUR bLOwER
See Figure 1.
The safe use of this product requires an understanding of
the information on the tool and in this operator's manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
UNPAcKING
This product requires assembly.
 Carefully remove the product and any accessories from
the box. Make sure that all items listed in the packing list
are included.
wARNING:
Do not use this product if any parts on the Packing List
are already assembled to your product when you unpack
it. Parts on this list are not assembled to the product by
the manufacturer and require customer installation. Use
of a product that may have been improperly assembled
could result in serious personal injury.
 Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
 Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the product.
 If any parts are damaged or missing, please call
1-800-242-4672 for assistance.
PAcKING LIST
Blower
Blower Tube
Operator's Manual

FEATURES

bLOwER TUbE
The blower tube can be easily installed on the blower without
any additional tools.
cORD RETAINER
A convenient cord retainer helps keep the extension cord
connection secure during blower operation.
TwO-SPEED
The two-speed switch is designed for LOw or HI speeds.

ASSEMbLy

wARNING:
If any parts are damaged or missing do not operate this
product until the parts are replaced. Use of this product
with damaged or missing parts could result in serious
personal injury.
wARNING:
Do not attempt to modify this product or create acces-
sories not recommended for use with this product. Any
such alteration or modification is misuse and could result
in a hazardous condition leading to possible serious
personal injury.
wARNING:
Do not connect to power supply until assembly is com-
plete. Failure to comply could result in accidental starting
and possible serious personal injury.
ASSEMbLING THE bLOwER TUbE
See Figure 2.
 Slide blower tube forward until the notched areas on the
blower housing click into the slots on the tube.
Page 7 – English