Enlarging the picture (D.ZOOM)
POWER
INPUT
VIDEO
RGB
AUTO
MENU
SETUP
ENTER
FREEZE
SHUTTER
STD
VOLUME
D.ZOOM
INDEX
WINDOW
PROJECTOR
The remote control unit functions during D.ZOOM (digital zoom)
Press the D.ZOOM +/- buttons to change the enlargement ratio.
Press the F,G,IandHbuttons to move the enlarged area which you want to project.
Press the MENU button to return to the normal screen.
NOTE:
B The enlargement ratio can be changed within the range of x1 to x2, in
steps of 0.1. When RGB signals are being input, the enlargement ratio
can be changed within the range of x1 to x3, except when the "FRAME
LOCK" is set to "ON".
B If the type of signal being input changes while the digital zoom function
is being used, the digital zoom function will be cancelled.
Adjusting the volume (VOLUME)
STD
VOLUME
D.ZOOM
INDEX
WINDOW
PROJECTOR
30-E
NGLISH
Press the D.ZOOM +/- button.
B The picture will then
be enlarged to 1.5
times the normal size.
Press the VOLUME +/- button.
B Press the + button to raise the volume.
B Press the - button to lower the volume.
NOTE:
B You can also select "VOLUME" from the
"MAIN MENU" to adjust the volume.
[