VOX electronics TM-6105 Manual De Usuario página 7

HOW TO USE
Before initial use
1. Before first use, unpack the appliance and place all parts on a horizontal surface.
2. The jar assembly (as Fig.1, including the measure cup, lid, glass jar) has already
been assembled into the base. Disassemble to wash all detachable parts except the
base. Please refer to the latter chapter CARE AND CLEANING.
3. Once all pieces have been cleaned and dry thoroughly, reassemble them.
1) Re-position the jar assembly with its opening upwards, and then put the lid onto the
jar assembly. Place the measure cup exactly into the lid by aiming at a fixed position in
the middle of the lid and turning the cup clockwise up to tightly. （See Fig.3）
2) Finally, place the assembled jar onto the base by adjusting well the connector at the
bottom of the jar (Please make the handle down towards the unlock sign on base and
tighten to the locking sign) (See Fig.4 and 5）
CAUSION: Do not try to twist the jar and jar base onto base
Fig.3
Fig.4