Start Washer - Maytag MAV-19 Guia Del Usuario

C
ONTROLS AT A GLANCE
Step 3 Select water
temperature
Press the appropriate button to select the
wash and rinse temperatures. Follow the gar-
ment care label for best results. Use the chart
at the right as a guide. While the washer is fill-
ing, there may be a mixing of hot and cold
water to reach the proper water temperature.
REMEMBER: In wash water temperatures
below 65° F, detergents do not dissolve
well or clean well. Care labels define cold
water as up to 85° F.
Step 4 Select a
customized cycle
Press the appropriate button(s) to select one
or more options.
Step 5

Start washer

• Add detergent and any additives
• Add load and close lid
• Pull the control dial out to start
3
CONT.
USE
SUPER WASH – Can be used with any
wash cycle to clean very heavily soiled
items. Provides fast agitation and normal
spin throughout all cycles.
NORMAL WASH – Can be used with all
wash cycles to provide normal agitation
and normal spin speed. Use for the major-
ity of loads.
EXTRA RINSE – Provides an additional
rinse at the end of the cycle to more com-
pletely remove laundry additives, suds,
perfume, etc.
NORMAL RINSE – Cancels the second
deep rinse. Provides one deep rinse.
LOAD TYPE
HOT/COLD – White and heavily soiled,
color-fast items
WARM/WARM – Delicate or colorfast
items
WARM/COLD – Moderately soiled,
colored items; most wrinkle free items
COLD/COLD – Brightly colored, lightly
soiled items; washable woolens
TEMPERATURE
HOT: 120° F
WARM: 85° F
COLD: Tap water temperature
ENERGY SAVING WASH LIGHT – Energy
Saving Wash light will illuminate unless
Super Wash or Extra Rinse are selected.