Information Before You Start; Starting / Stopping The Engine - Stihl MS 210 Manual De Instrucciones

: Lift out the shutter (in front of spark
plug) vertically.
: Turn the shutter 180°.
: Refit the shutter.
: Refit the carburetor box cover and
secure it the twist lock.
Heated air is now drawn in from around
the cylinder and mixed with cold air –
this helps prevent carburetror icing.
At temperatures above +20°C/70°F,
always close the shutter again. This
is important to avoid engine running
problems, i.e. overheating.
MS 210, MS 210 C, MS 230, MS 230 C, MS 250, MS 250 C
Information
Before You Start
STOP
0
The four positions of the
Master Control lever
$ = Engine off –
ignition is switched off.
# = Normal run position –
engine runs or can fire.
To move the Master Control lever from #
n l
to or , press down the throttle
trigger interlock and squeeze throttle
trigger at the same time.
n
=Warm start – this position is used to
start a warm engine. The Master
Control lever moves to the normal
run position as soon as the throttle
trigger is squeezed.
l
=Cold start – this position is used to
start a cold engine.
English / USA
Starting / Stopping
the Engine
Models with fuel pump
: Prime the fuel system by pressing
the fuel pump bulb about five times.
Press a few times more if you are
starting for the first time after refilling a
dry tank.
41