Common Problem Analysis - VOX electronics МC-9005 Manual De Usuario

Do not touch blade to avoid
 COMMON PROBLEM ANALYSIS
Phenomenon
The appliance cannot
work when turned on
Bad smell from motor
The appliance
stops running during
the normal operation
The knife is stuck
Abnormal noise or shock 1. The blade inut is not
Remark: If still unable to sort out the troubles after the above analysis, please contact
our maintenance station or the dealer. It is forbidden to disassembly by non-professional personnel
injury
Reason
The lid is not well
covered
It is normal phenome-
non from a new motor
1.The voltage is too low
2.Motor
temperature protection
The knife is stuck by
food
well assembled.
2. The appliance is not
laid flat.
3. The voltage is too
high
4. Too much food
Do not run the appliance
more than 30 seconds continuously
Handling method
Check the lid and cover
it well
If you have used
several times but it still
has bad smell ,
please send it back to
maintenance station.
1.Check if the voltage is
too lower
2.Rest 20-30 minutes
Turn off the swich,
unplug the device, take
out the food and cut it
into small pieces
1.Take out the food
and assemble the blade
unit well
2.Lay the appliance on
the flat surface.
3.Check if the voltage is
too high
4.Turn off the switch,
unplug and
extra food
take out
9