Receiving Traffic Announcements; Using Pty Functions - Pioneer DEH-50UB Manual De Instrucciones

Operating this unit
Notes
! Regional programming and regional networks
are organized differently depending on the
country (i.e., they may change according to
the hour, state or broadcast area).
! The preset number may disappear from the
display if the tuner tunes in a regional station
which differs from the originally set station.
! The regional function can be turned on or off
independently for each FM band.

Receiving traffic announcements

TA (traffic announcement standby) lets you re
ceive traffic announcements automatically, no
matter what source you are listening to. TA
can be activated for both a TP station (a sta
tion that broadcasts traffic information) or an
enhanced other network's TP station (a station
carrying information which cross references
TP stations).
1 Tune in a TP or enhanced other net-
work's TP station.
TP indicator lights.
2 Press TA to turn traffic announcement
standby on.
# To turn off, press TA again.
3 Use MULTI-CONTROL to adjust the TA
volume when a traffic announcement be-
gins.
The newly set volume is stored in memory and
recalled for subsequent traffic announce
ments.
4 Press TA while a traffic announcement
is being received to cancel the announce-
ment.
The tuner returns to the original source but re
mains in the standby mode until TA is pressed
again.
Notes
! You can also turn this function on or off in the
menu that appears by using
MULTI-CONTROL.
! The system switches back to the original
source following traffic announcement recep
tion.
! Only TP and enhanced other network's TP sta
tions are tuned in during seek tuning or BSM
when TA is on.

Using PTY functions

You can tune in a station by using PTY (pro
gram type) information.
Searching for an RDS station by PTY
information
You can search for general types of broadcast
ing programs, such as those listed on the next
page.
1 Use MULTI-CONTROL to select
PTY SEARCH in the function menu.
2 Press MULTI-CONTROL to display the
setting mode.
3 Use MULTI-CONTROL to select the de-
sired setting.
Turn to change the setting.
NEWS/INFO POPULAR CLASSICS
OTHERS
4 Press MULTI-CONTROL to begin the
search.
The unit searches for a station broadcasting
that program type. When a station is found, its
program service name is displayed.
PTY (program type ID code) information is
listed on the next page.
# To cancel the search, press MULTI-CONTROL
again.
# The program of some stations may differ from
that indicated by the transmitted PTY.
Section
02
13
En