Using Auto Pi Seek For Preset Stations; Limiting Stations To Regional Program- Ming; Receiving Traffic Announcements - Pioneer DEH-P4400R Manual Del Usuario

RDS

Using auto PI seek for preset stations

When present stations cannot be recalled, as
when travelling long distances, the unit can be
set to perform PI seek during preset recall.
• The default setting for auto PI seek is off. See
Switching auto PI seek on page 36.
Limiting stations to regional program-
ming
When AF is used to automatically retune fre-
quencies, the regional function limits the selec-
tion to stations broadcasting regional
programs.
1 Press to select
FUNCTION
Press until
FUNCTION
play.
2 Press 5 to turn the regional function on.
Press 5 and
is displayed.
REG :ON
3 Press ∞ to turn the regional function off.
Press ∞ and
REG :OFF
Notes
• Regional programming and regional networks
are organized differently depending on the
country (i.e., they may change according to
the hour, state or broadcast area).
• The preset number may disappear on the
display if the tuner tunes in a regional station
which differs from the originally set station.
• can be turned on or off independently for
REG
each FM band.
REG.
appears in the dis-
REG
is displayed.

Receiving traffic announcements

TA (traffic announcement standby) lets you
receive traffic announcements automatically,
no matter what source you are listening to. TA
can be activated for both a TP station (a station
that broadcasts traffic information) or an
enhanced other network's TP station (a station
carrying information which cross-references TP
stations).
1 Tune in a TP or enhanced other network's
TP station.
When you are tuned into a TP or enhanced other
network' s TP station the
2 Press to turn traffic announcement
TA
standby on.
Press and the indicator appears in the
TA TA
display. The tuner will standby for traffic
announcements.
• To turn traffic announcements standby off,
press again.
TA
3 Use to adjust the
VOLUME
a traffic announcement begins.
Rotate to increase or decrease the volume.
The newly set volume is stored in memory and
recalled for subsequent traffic announcements.
4 Press while a traffic announcement is
TA
being received to cancel the announcement.
The tuner returns to the original source but
remains in the standby mode until
again.
indicator will light.
TP
volume when
TA
is pressed
TA
En
Section
04
15