Makita DLS211 Manual De Instrucciones página 8

24. When cleaning the wireless unit, gently wipe
with a dry soft cloth. Do not use benzine, thin-
ner, conductive grease or the like.
25. When storing the wireless unit, keep it in the
supplied case or a static-free container.
26. Do not insert any devices other than Makita
wireless unit into the slot on the tool.
27. Do not use the tool with the lid of the slot dam-
aged. Water, dust, and dirt come into the slot may
cause malfunction.
PARTS DESCRIPTION
1
2
3
4
5
1 Slide pole
5 Sub base
9 Kerf board
13 Blade guard
17 Adjusting screw (for
lower limit position)
21 Lock lever (for turn base)
17
20
18
19
7
6
2 Stopper pin (for carriage
sliding)
6 Turn base
10 Blade case
14 Knob (for bevel angle)
18 Adjusting bolt (for maxi-
mum cutting capacity)
22 Releasing lever (for turn
base)
28. Do not pull and/or twist the lid of the slot more
than necessary. Restore the lid if it comes off
from the tool.
29. Replace the lid of the slot if it is lost or
damaged.
SAVE THESE INSTRUCTIONS.
10
11
12
13
14
15
16
9
8
3 Vertical vise
7 Pointer (for miter angle)
11 Adjusting screw (for
laser line)
15 Hex wrench
19 Stopper arm
23 Grip (for turn base)
8 ENGLISH
21
22 23
4 Releasing button (for
right side bevel angle)
8 Miter angle scale
12 Range adjustment screw
(for laser line)
16 Sub fence
20 Battery cartridge
- -