Tabla de contenido
Publicidad
Sistemi Elettronici
di Apertura Porte e Cancelli
International registered trademark n. 804888
TECHNICAL FEATURES
Supply voltage
Motor power supply
Motor power
Motor speed
Working temperature
Opening/closing time
Protection class
Manual release system
Usage frequency
Anti-crushing device
Holding block
Slowdown
Barrier body treatment
Weight
Electronic equipment
OVERALL DIMENSIONS:
2 0 3
2 8 8
1) Spring position
Opening on the left
Thanks to its high flexibility, the barrier you are installing can be closed
on the right-hand or left-hand side of the post, according to your needs.
e.g. if the spring is on the right-hand side, the guard closes on the left
(see Fig. 2).
Fig.1
12
®
VERG 230V
230 V~ ± 5% - 50/60 Hz
Cataphoresis treated and polyester painted
VERG
Opening time*
Frequency**
INSTALLATION INSTRUCTIONS
VERG 115V
115 V~ ± 5% - 50/60 Hz
24Vdc
60 W
2400
RPM
-20° + 55°C
Adjustable
IP55
Yes
60%
Ammeter
Yes
Electronic
39 kg
USER 1 24V
BEAMS RECOMMENDED SPEED
2mt
2-3 sec 3-4 sec 4-5 sec 5-6 sec
60%
*To guarantee longer life of the barrier, SEA
142,5
recommend to adjust the speed giving an extra time
of at least 1 sec from the Max Speed as for this
77
chart.
** SEA grant those performances only for the 1st
hour of operation. After 1 st hours cycles can drop
up to 50%. Cycles are granted only with slowdown
active. Periodically check the balance of the beam.
Note: The frequency of
use is valid only for the
first hour at 20°C room
temperature.
3mt
4mt
5mt
50%
45%
35%
Opening on the right
Fig.2
English
Articulated beam
3mt
5-6 sec
35%
Publicidad
Tabla de contenido
