Dyna-Glo DGE486BSP Manual De Instrucciones página 14

ASSEMBLY INSTRUCTIONS
13. Secure side burner assembly (S) to left side
burner table assembly (T) using 2 screws
(DD). Ensure side burner orifice placed into
the gas inlet tube of side burner. Install the
ignition wiring to the electrode assembly.
Hardware Used
M4x12 Screw
DD
Correct
Wrong
Wrong
13
x 2
Side Burner Ignition Wire
Side Burner Gas
Inlet Tube
14
S
DD
Electrode Assembly
S
Side Burner Gas
Valve Assembly