Main Display - PIONEER DJ DJM-750MK2 Manual De Instrucciones

d EQ/ISO (HI, MID, LOW) controls (page 11 )
Adjusts the sound quality of each channel.
e Channel Level Indicator (page 11 )
Displays the sound level of each channel before it passes through
the channel faders.
f COLOR control
This changes the parameters of the SOUND COLOR FX of the differ-
ent channels.
g CUE button (page 11 )
Presses the [CUE] button of the channel to be monitored.
h Channel Fader (page 11 )
Adjusts the level of sound output from each channel.
i CROSS FADER ASSIGN (A, THRU, B) selector switch
(page 11 )
Sets the output destination of each channel to [A] or [B].
j Crossfader (page 11 )
Outputs audio signals assigned by the crossfader assign switch cor-
responding to the curve characteristics selected by [CROSS FADER]
(Crossfader Curve Selector Switch).
k MASTER LEVEL control (page 11 )
Adjusts the level of sound are output from the [MASTER1] and
[MASTER2] terminals.
l CLIP indicators
Master: Flashes when audio with an excessive volume level is output
from the [MASTER1] or [MASTER2] terminals.
m Master Level Indicator (page 11 )
Displays the level of sound output from the [MASTER1] and
[MASTER2] terminals.
n BOOTH MONITOR control (page 11 )
Adjusts the level of sound output from the [BOOTH] terminal.
o EQ CURVE (ISOLATOR, EQ) selector switch (page 11 )
Sets the function of the [EQ/ISO (HI, MID, LOW)] controls.
p CH FADER ( ,
Sets the curve characteristics of the channel fader.
q CROSS FADER (
Sets the curve characteristics of the crossfader.
r SEND/RETURN (1/4" JACK,
Sets the input and output sources for the SEND/RETURN channel.
You can select the device connected to the [SEND/RETURN] ter-
minals on the rear panel of this unit or the device connected to the
mobile device connection terminal on the operation panel.
s RETURN TYPE (AUX, INSERT) selector switch
Sets the SEND/RETURN method.
t Mobile device connection terminal (USB port)
Connect a mobile device.
u USB connection indicator
Lights when a mobile device is connected. Blinks when an incompat-
ible device is connected.
v SEND/RETURN ON/OFF button
Turns SEND/RETURN on and off.
w SEND/RETURN LEVEL control
Adjusts the sound level of SEND/RETURN.
x Main display
Displays the effect name, BPM, effect parameter, etc.
y BEAT c, d buttons
Sets the beat fraction for synchronizing the effect sound.
8
En
, ) selector switch
, , ) selector switch
) selector switch
z TAP button
When the BPM measurement mode is set to [TAP], tap this button
with a finger to input the BPM manually.
A UTILITY (WAKE UP) button
— UTILITY: Press and hold down this button to display the
[UTILITY] screen. It lights when the [UTILITY] screen is dis-
played. Press this button when the [UTILITY] screen is displayed
to return to the normal screen.
— WAKE UP: Lights when the product enters standby mode. Press
this button in standby mode to exit standby mode.
B AUTO/TAP button
Sets the BPM measurement mode.
C FX FREQUENCY button
Sets the range to apply BEAT FX. BEAT FX is applied to the lit button.
D Beat effect selector switch
Sets the BEAT FX type.
E Effect channel selector switch
Sets the channel to apply the BEAT FX and SEND/RETURN to.
F TIME control
Adjusts the BEAT FX time parameter.
G LEVEL/DEPTH control
Adjusts the BEAT FX quantitative parameter.
H Beat effect ON/OFF button
Turns BEAT FX on and off.
Do not pull on the channel fader and crossfader knobs with excessive
force. The knobs have a structure by which they cannot be pulled off
easily. Pulling the knobs strongly may result in damaging the unit.