Step 3
Preparing the battery pack
Charge the battery pack for more than 12 hours before you start using
your phone.
Red
Black
Hook
CHARGE lamp
1
Slide open the battery
compartment lid of the handset.
2
Connect the battery connector
with correct polarity (black and
red cords).
3
Hook the cords and insert the
battery pack. Then close the lid.
4
Place the handset on the base
unit.
You can place either side facing
up.
The CHARGE lamp lights up
when the handset is properly
seated on the charge terminals
of the base unit. Charge the
battery pack for more than 12
hours so that the battery is fully
charged. The CHARGE lamp
remains lit even after charging
is completed.
continued
EN
11
Getting Started